/ Instrumentation


The dipole magnet iron yoke design for the ALICE Dimuon Arm Spectrometer


Arefiev, V. (Dubna, JINR) ; Boguslavsky, I. (Dubna, JINR) ; Borisov, V. (Dubna, JINR) ; Bunzarov, Zh (Sofiya U.) ; Cacaut, D. (CERN) ; Efremov, A. (Dubna, JINR) ; Fedorov (Dubna, JINR) ; Kochournikov, E. (Dubna, JINR) ; Makarov, A. (Dubna, JINR) ; Olex, I. (Dubna, JINR) ; Ustenko, E. (Dubna, JINR) ; Shurygin, A. (Dubna, JINR) ; Shurygina, M. (Dubna, JINR) ; Sissakian, A. (Dubna, JINR) ; Swoboda, D. (CERN) ; Vodopianov, A. (Dubna, JINR)
Joint Institute for Nuclear Research

Page No: 291-300
Pages: 10
Year: Dubna 2005 Joint Institute for Nuclear Research

Abstract: Iron Yoke of about 820 tons for the Dipole Magnet with aluminium water cooledwinding has been produced for the DiMuon Arm Spectrometer of ALICE experiment atthe LHC. This magnet provides the bending power to measure the momenta of muons.The initial design of the magnet was prepared by JINR. The main feature of thismagnet is the huge uncompensated force applied from the neighbouring solenoidmagnet L3. The yoke of the magnet was manufactured and preliminary assembled inRussia in Tver region at SMZ manufacturing company and transported to CERN. Theresults of electromagnetic forces calculations and deflected mode analysis arepresented. Design, following up of the yoke production and the main features ofthe technology process are discussed.

Web-Page: http://inspirehep.net/record/1497952/files/1436453_291-300.pdf


Note: *Temporary record*

Total numbers of views: 215
Numbers of unique views: 93
 Запись создана 2016-12-02, последняя модификация 2016-12-02


Внешняя ссылка:
Загрузка полного текста
Полный текст
Оценить этот документ:

Rate this document:
1
2
3
 
(Еще не рецензированная)